DroneLand

What’s New

•    Added Terrain Follow for flight tasks:

a.    Smart Oblique and Linear tasks support both Real-Time Follow and DSM Follow.

b.    Oblique tasks only support DSM Follow.

•    Added POI function. The aircraft can circle and fly around a PinPoint to obtain omnidirectional information of the target.

•    Added ability to customize the camera angle for Mapping tasks. When planning a flight route, the aircraft orientation and gimbal pitch angle can be set for the route. Convenient for inspections of specific scenarios, such as solar panels.

•    Added ability to execute flight tasks during flight for fast and efficient execution of flight tasks at the current location. Tap the flight route icon to create or select a flight task on the camera or map view of the DJI Pilot 2 app.

•    Added ability to set Safe Takeoff Altitude for flight tasks to improve flight safety. This parameter setting is only valid when the aircraft executes a flight task before takeoff. If the aircraft starts a flight task during flight, the safe takeoff altitude will not take effect.

•    Added ability to create Mapping or Oblique tasks by selecting an area in the map view. Convenient to generate a flight route after synchronizing the mapping area planned on DJI FlightHub 2 to the DJI Pilot 2 app.

•    Added ability to import MBTiles format maps downloaded from Maptiler. The map layer can be customized in the DJI Pilot 2 app.

•    Added ability to export logs by different modules in the DJI Pilot 2 app.

•    Added encryption for Network Security Mode in the DJI Pilot 2 app. After setting a password, users can only change the Network Security Mode or adjust the function settings after entering the password.

•    Optimized Real-Time Follow. The minimum altitude is adjusted from 80 m to 30 m. The altitude for Real-Time Follow is updated to 30-200 m.

•    Optimized firmware update prompt in the DJI Pilot 2 app.

•    Fixed issue: the aircraft returns too slowly if RTH is triggered from a short distance.

•    Fixed issue: the RTH altitude is not updated timely on the DJI Pilot 2 app.

•    Fixed rare issue: the aircraft vibrates when the aircraft orientation is adjusted during manual flight.

•    Added ability for Mavic 3T to adjust infrared temperature measurement parameters, such as subject emissivity and temperature measurement distance.

Notes:

•    Restart the aircraft and remote controller after the update is complete.

•    If the update fails, restart the aircraft, remote controller, and DJI Pilot 2 or DJI Assistant 2 (Enterprise Series), and retry.

•    Make sure the firmware of the aircraft and the remote controller, and DJI Pilot 2 are the latest versions. Otherwise, usage may be affected.