Aircraft Firmware: | v04.00.02.00 |
Remote Controller Firmware: | v04.00.02.00 |
Pilot 2 App Android: | v4.0.1.16 |
D-RTK 2 Mobile Station for Matrice: | v03.01.00.00 (D-RTK 2 Mobile Station: v03.01.00.00) |
Intelligent Battery Station: | v04.00.01.03 |
Intelligent Flight Battery: | v01.02.05.44 |
Zenmuse H20 / H20T: | v04.00.00.10 |
Zenmuse H20N: | v04.00.02.00 |
Zenmuse P1: | v03.00.01.04 |
Zenmuse L1: | v04.00.01.06 |
Zenmuse Z30: | v01.00.07.10 |
Zenmuse XT2: | v01.00.03.50 |
Zenmuse XT S: | v01.00.00.09 |
DJI X-Port: | v01.03.02.00 |
DJI Skyport: | v01.04.00.00 |
DJI Skyport V2: | v01.03.02.00 |
DJI Assistant 2 (Enterprise Series): | v2.1.3 |
What’s new
• Fixed an occasional issue: where the Intelligent Flight Battery required maintenance and could not be used for flight after updating the firmware to v01.02.05.43.
• Fixed an occasional issue: where the Mission flight files stored in the remote controller failed to display in the flight route library after updating the firmware to v04.00.01.10.
• Fixed issue: where the app crashed when tapping the PSDK shortcut button in the video transmission view.
Notes:
• For a battery with an out-of-date firmware version (and that requires maintenance), make sure the battery level is lower than 90% when updating the firmware. After the firmware update is complete, fully charge the battery and remove it from the battery station. Let the battery sit for two hours before use.
• Users who use Custom Network RTK must update the aircraft firmware to v01.00.02.14 or later.
• The aircraft cannot revert to firmware version v01.00.02.11 or earlier once the firmware is updated.
• Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used) are updated to the latest firmware version.
• Download the latest firmware from official website to microSD card to update Zenmuse Z30, XT S, XT2, P1 or H20 / H20T.
• DJI Pilot app must be updated to v3.0.1.4 or later to use Offline Update.